by Sophie Green Updated on 2021-04-12 / Update for Samsung Show I am trying to clone a 1GB HDD to a 1GB Samsung 850 EVO SATA III SSD on a desktop system running Windows 10 and the progress gets stuck at 0%." Samsung offers a utility called Samsung Data Migration to all its SSD users to help transfer their data. While the tool works just fine most of the time, sometimes you might find Samsung Data Migration stuck issues. If this happens, your data transfer will be halted. You will probably want to do something about the stuck issue so that your data continues to transfer to your newly bought SSD drive. This guide lists some of the tips you can use to fix the Samsung Data Migration stuck at 99 issue with the utility. The following are some of the standard fixes that you can apply to possibly fix the error. 1. Check the Original and Target Samsung SSDThe first thing you need to do is to check if both your new and old drives are working fine. Windows provides you with a command that helps check the health of your disks, and you can run it from the Command Prompt to check both your old and new Samsung SSD drive.
2. Try a Different SATA cable and SATA PortIt might be that the SATA cable or the SATA port that you are using is defective. In this case, your data will not move easily because there are physical obstacles. Try using another cable and port and see if that works for you. 3. Check Your Target Disk SpaceIt is important to make sure that the drive you are copying data to has enough space available on it. If you try to copy data, say worth 100GB to an SSD that only has the capacity of 50GB, your transfer is bound to fail. Ideally, you should only transfer data up to 75% of the total space on your target disk. This is to ensure there is some buffer space available. That should help fix the Samsung Data Migration stuck at 0 issue with your transfer task. 4. Update Samsung Data Migration to Latest VersionSamsung pushes out new updates for its data migration tool and you should always make sure to have the latest version of it. If you are using an old version of Samsung Data Migration, that may be why Samsung Data Migration stuck at 100. Head over to the Samsung site and get the tool’s version updated to the latest one. Then, start the data transfer process from the beginning and it should go smoothly this time around. If your Samsung Data Migration stuck at 99% despite following the above methods, it might be a good idea to try another tool and see if that helps transfer data your new SSD drive without any issues. There is a tool called Tenorshare Free Data Backup that lets you clone your old drive to the new one without any hassle. It copies over all the data, including all your files, from your old drive to the new one. All you need to do is make a few clicks in this program and you are good to go. The following is how you clone drives, both HDD and SSD, using this tool.
You have successfully migrated all your old drive’s data to your new Samsung SSD without using the Samsung Data Migration tool. If your data migration task with Samsung Data Migration is not progressing and is stuck somewhere, one of the above methods will help you sort the issue out on your computer. In case the tool does not work even after that, you might want to use an alternate tool - Tenorshare Free Data Backup to get the task done.
There are some questions that people often ask about this tool. The following provides answers to those questions. 1. How long does Samsung Data Migration take? The time it takes to migrate your data totally depends on the amount of data that you are copying. If you are only copying a few small files, this will only take a few minutes. If you are migrating hundreds of gigs of data, the process can take several hours. 2. Will Samsung Data Migration delete files? Samsung Data Migration will delete all files on the target disk before the migration starts. You should back up any files that you wish to preserve. 3. Does Samsung Data Migration work with Windows 10? Yes, Samsung Data Migration works with the latest Windows 10 operating system. 4. Will Samsung Data Migration work with other SSDs? No, Samsung Data Migration only works with the Samsung SSDs and you cannot use it with the SSDs from other manufacturers.
Ich hoffe, dass ich hier jemanden finden kann, der genug Fachwissen mit sich bringt! Problem ist: Ich möchte meine alte SSD auf meine neue Samsung 850 Pro klonen, also auch mein Betriebssystem Windows 10. Die Migrationssoftware "Clonix" von Samsung läuft durch bis 99%, dann kommt folgende Fehlermeldung: "Bei der Anpassung der Patritionsgröße ist ein Fehler aufgetreten". Festplatten sind mein absoluter Schwachpunkt was PCs betrifft, aber da das Klonen bei Samsung SSDs ja angeblich so einfach sein soll, hab ich mich mal selbst rangewagt. Und siehe da: Ich kriegs einfach nicht hin. In der Computerverwaltung läuft wohl irgendwas nicht rund. Die alte SSD ist Datenträger 0, die Samsung ist Datenträger 1 ("Nicht initialisiert"). Ich hoffe, dass ich mir nicht extra einen Account bei einem PC-Forum machen muss, sondern das Problem heute noch lösen kann. ...komplette Frage anzeigen
Wenn die neue Samsung leer ist und Datenträger 1 ("Nicht initialisiert") zugleich ist muss du mit der rechten Maustaste auf diesen Datenträger klicken dann öffnet sich ein Menüdort musst du erstmals auf Datenträgerinitallisierung klicken dadurch wird die Festplatte Formatiert und eingrichtet.
Mit Acronis geht das. Habe es schon mehrfach getan. Kostet allerdings auch Geld. Du kannst es allerdings auch mit Paragon versuchen. Dabei brauchst du allerdings etwas Hintergrundwissen. Und das kostet auch Geld. Alle anderen hier aufgeführten Programme sind nicht 100%-tig geeignet, da sie mitunter Fehler produzieren.
Versuche doch mal ein anderes Programm zum Klonen, z.B. Clonezilla. Könnte mir vorstellen, dass das Samsung Tool nicht ganz ausgereift ist?! Clonezilla gibts dagegen schon lange. Ansonsten hilft vielleicht auch eine Boot-CD oder ein Bootstick, aber dazu würde ich erst im nächsten Schritt raten. Der Status "nicht initialisiert" ist bei neuen Festplatten normal.
99% ? Ist auf der "alten" SSD eine versteckte Recovery Partition vorhanden? Ich habe mal irgendwo gelesen, dass die Samsung Migrationssoftware nur "sichtbare" Partitionen schafft und auch nur, wenn das Ziel mindestens genauso groß ist wie die Quelle oder größer als diese.
Versuch doch mal ein Systemabbild zu erstellen von deiner alten Festplatte und dieses spielts du dann auf die neue
Unterschied Samsung SSD QVO, EVO und Pro? Ich möchte bei meinem Lenovo IdeaPad L340 Gaming meine interne 1TB SSD durch eine 2TB SSD austauschen. Beim Media Markt habe ich 3 Samsung SSDs gefunden, aber wo liegt bei denen der Unterschied? https://www.mediamarkt.de/de/product/_samsung-sata-ssd-870-qvo-2666074.html https://www.mediamarkt.de/de/product/_samsung-sata-870-evo-2708556.html https://www.mediamarkt.de/de/product/_samsung-sata-ssd-860-pro-2379400.html |